Victory Reach-In Manual de Serviço descarregar pdf (Página 76)

Section 7Diagnostics

7-8

FREEZER DEFROST TIMER SETTINGS

To set the time, grasp the knob in the center of

the inner two-hour dial. Turn it

counterclockwise to rotate the outer dial. Line

up the current time of day on the outer dial

with the time pointer.

Figure 7-2: Freezer Defrost Timer

The freezer defrost timer is preset for three

defrost cycles every 24 hours. To add and/or

change defrost times:

1. Remove the pins from the outer (large)

dial.

2. Insert the pins into the desired time slots.

3. Adjust the defrost times to maintain equal

operational periods between defrosts.

CAUTION

Leave at least one hole between adjacent

pins.

ADJUSTING DEFROST SAFETY

TERMINATION

The defrost cycle is normally terminated by a

thermodisc. It is automatically terminated if a

system malfunction occurs.

The backup defrost termination is preset at the

factory for a 30-minute defrost cycle.

Normally, no adjustment is needed.

The backup safety defrost length can be reset

by pressing down on the inner pointer and

rotating until it is aligned with the desired

safety time.

24 HOUR DIAL

2 HOUR DIAL

TIMER DIAL

SV1080

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 91 92

Sem comentários

Victory Reach-In Manual de Serviço Página 76