
Section 8 Component Replacement Procedures
8-3
Evaporator Defrost (Calrod) Heater (Freezer Only)
1. Disconnect electrical power to the reach-in.
2. Lower the evaporator drain pan (see page 8-1).
3. Unplug the calrod heater at the terminal board and the automatic defrost timer.
4. Carefully pull out the clips and remove the calrod heater.
Figure 8-3: Evaporator Defrost (Calrod) Heater
SV1249
4. REMOVE CLIPS
3. UNPLUG CALROD HEATER
CALROD HEATER
Comentários a estes Manuais